Innovative memory and storage solutions direct from Micron for 45 years.

How to transfer data from an M.2 PCIe SSD to a new M.2 PCIe SSD

If your system only has one M.2 PCIe slot, moving data to a new SSD can be tricky, but it’s doable. Here are two simple ways to get it done. 

Option 1: Clone your M.2 PCIe SSD

Cloning is a way to copy everything from your current drive to the new one. To do this, you’ll need a USB to PCIe M.2 adapter. 

  1. Connect your new Crucial SSD using the adapter 
  2. Download and install Acronis® True Image for Crucial 
  3. Follow the cloning steps in Acronis to transfer your data 

Once the clone is complete, shut down your system, swap in the new SSD, and start your computer. Windows should boot normally.

Need help installing the new drive? Check out the Crucial SSD firmware and support page, or refer to your system manufacturer’s manual for more details. 

Option 2: Create a backup image on Windows

You can also back up your current SSD and restore it to the new one: 

  1. Use the built-in Windows backup tool to save a system image to a hard drive or large USB stick 
  2. Swap in your new M.2 PCIe SSD 
  3. Use the Windows recovery media to restore your system image 

This method works well if you’re not able to clone directly. If you need help with backup and recovery, the Acronis software also includes these tools. 

Additional resources

For more information about your Crucial products, visit the Crucial support page for detailed guides, tools, and free downloads to make the process even easier. 

©2025 Micron Technology, Inc. All rights reserved. Information, products, and/or specifications are subject to change without notice. Neither Crucial nor Micron Technology, Inc. is responsible for omissions or errors in typography or photography. Micron, the Micron logo, Crucial, and the Crucial logo are trademarks or registered trademarks of Micron Technology, Inc. PCI Express and PCIe are registered trademarks of PCI-SIG. Acronis is registered trademark of Acronis International GmbH. Microsoft and Windows are trademarks of Microsoft Corporation in the U.S. and/or other countries. All other trademarks and service marks are the property of their respective owners.